PVC-U PRESSURE FITTINGS PN16

APPLICATIONS : PVC-U products are used for water supply, irrigation, watering, swimming pool systems, chemical industry, food industry, etc.

USE : The nominal pressure is stated on tables of each product. The working conditions are also linked to fluid temperature according to below table 1.

SOLVENT CEMENT JOINTING CONNECTION : The solvent cement jointing connection comply with European standard EN 1452.

THREADED CONNECTION : Unless otherwise specified, all the threaded connections are made according to ISO 228-1 standard (BSPP).

FLANGE CONNECTION : Flange dimensions comply with EN 1092-1 standard and are suitable for most of the hydraulic equipments. Theses dimensions are stated on below table 2.

COMPRESSION FITTINGS FOR PE PIPES - METRIC SERIES

APPLICATIONS : CODITAL polypropylene compression fittings are designed for many applications : water, drinking water, food products, hydrocarbons, chemical solutions, compressed air and gas. Refer to our chemical resistance guide for more details.

USE : The nominal pressure is stated on tables of each product. The working conditions are also linked to fluid temperature according to below table 1.


PIPES : Our fittins are suitable for joining high and low density polyethylene pipes (HDPE, LDPE, PE40, PE63, PE80, PE100) conformes aux normes EN 1220, ISO 3607 / 14236, and DIN 8072 / 8074 standards.

DIMENSIONS : Our fittings comply with the dimensional requirements of the following standards : EN 712 / 713 / 715 / 911, ISO 3458 / 3459 / 3501 / 3503 / 14236, DIN 8076. Threaded ends comply with ISO 7-1, DIN 2999 and BS21 standards. Theses are BSPT fittings, male ends are conical (R) and female ends are parallels (Rp) or conical (Rc) for size 4".
 

POLYAMIDE ACCESSORIES, BSPP FITTINGS & ADAPTORS

MATERIAL : Fittings are made of polyamide PA 6-6 (nylon). This material has high mechanical properties and good heat resistance. It is also a very good electrical insulator.

APPLICATIONS : Polyamide fittings are designed for many applications : water, drinking water, food products, hydrocarbons*, oils*, compressed air, etc.

USE :
Pressure : PN 16 bar (at 20°C)
Temperatures : 0-90°C

THREAD : Threaded fittings comply with ISO 228-1 standard (BSPP gas thread).

* Except fittings with EPDM gasket

POLYACETAL ACCESSORIES POM FOOT & CHECK VALVES

MATERIAL : Foot & check valves are made of polyacetal (POM). This material has high mechanical properties, good heat and chemical resistance.

APPLICATIONS : POM valves are designed for many applications : water, drinking water, food products, hydrocarbons, oils, compressed air, chemical solutions etc.

USE :
Pressure : PN 10 bar (at 20°C)
Temperatures : 0-85°C

THREAD : Threaded ends comply with ISO 228-1 standard (BSPP gas thread)